[ATTACH] Can I temporarily place a 53 gallon aluminum belly tank on my deck for a reserve fuel supply? I would need to modify the fill with...
I’m an anchoring novice, but looking for help learning to anchor in small anchorages in the Mississippi River. I have a good bridle and FX37 and...
I am looking for advice finding a catamaran daysailing vessel that doesn’t have a big cabin or any, but has seating versus trapezes. My wife is...
I am looking for any s&g designs that could be sold on a royalty basis and converted to cnc kit forms. Especially interested in small ones. dm...
I have 2 Moeller FT64 tanks with 13” arm senders. they are terrible and are ranging from 0-9 gallons error On a recent voyage, I departed a...
Is there anyone who might consider drawing a small craft for RC use? I’d lke a boat that can tow maybe 1kg out to say 1000 yards and return to...
[ATTACH] A friend used two piece of 3/4” starboard to shim his 90hp Yamahas out. Any advice on the idea?
They run a workboat at our marina. The motors are toed in. When they push boats on the bow of the workboat; they have poor maneuverability. I...
I’ve applied 0.250” thick G10 as a leading edge to my bow extensions. I used one or two layers of 1708 glass on each side. Two hulls, one was a...
I've used Navionics for years. On my small skiff, I usually load the maps when I get on the water. Some may find this irresponsible; it isn't...
[ATTACH] So, I hired a marine consultant who gave me a list of things to buy to protect my vessel, but a lot changed from then and now. Wife and...
Does anyone know if energy recovery ventilators or heat recovery ventilators are made for dc power on boats? Small ones? I want to make an air...
I have a new boat I built. I tested the fuel tanks to 2 psi and both passed, then sealed them in under the sole..they can be cut out, if needed....
[ATTACH] Any advice would be welcomed. or I'll just hand lam Just the nosecone to the relief; I need about 1600gsm, plus maybe a strip of 1708...
Does anyone have mixed density data for fairing compounds? I am mostly trying to understand what fairing compounds contribute best to buoyancy...
[ATTACH] If you have to build a 7000gsm layup and doing it by hand and choosing between woven roving and biax for this mould; what is the theory...
[ATTACH] I am considering trying to do infusion on this part. Probably a few layers of woven roving and biaxial; around 8mm thick glass. I am...
I am trying to understand the strength difference between using WR400g, which to me is a 12 oz roving and two layers of woven cloth 200g or 6 oz....
I built sections of interior benchtops using 3/4" marine plywood. They are roughly 2'x6' 2'x3' 2'x3' The unsupported dimensions are maybe 2"...
[ATTACH] [ATTACH] I built these splashguards for my boat to keep breaking waves from entering the cockpit area. They never got painted because I...
