Sorry need to take photos. The mold release was just an assumption and could be wrong. Best way to describe it is a slightly darker area in the...
May I ask how do you address this ?
Have a one year old new boat and getting some yellowing on the non skid. Possibly mold release ? What is the best non aggressive way to address...
Purchased a new boat last year and now starting to get yellowing on the non skid. Think it is mold release. what is the least aggressive way to...
There are many suppliers of marine hardware out there. Regretfully not all are using good quality non-magnetic 316 stainless. By chance do you...
What are folks go to interior satin teak oil ? Thanks for the feedback!
I did find that out. So regretfully still searching for someone to perform similar work to when Wendy was there
So really need a few quarts but would take a gallon or five gallon if required. I know Wendy retired but regeatfully I think the replacement does...
Thanks for the reply. The person at gel coat products who was outstanding at providing matches left and never had good luck with Spectrum....
Can someone recommend a facility that does good custom gel coat matching from a chip. Ideally a "AA" match in all three light sources. I had...
I would say more dense than copper pipe type insulation if that is neoprene
I would say like an industrial rubber mat, but only 1/16 to 1/8" thick. Sounddown does not make anything like this. Their hatch tape has a "D"...
I currently have a dense rubber insulation between the bottom of my hatch and hatch lip that I need to replace. It is glued in place and is...
