The SCAMP (acronym of Small Craft Advisor Magazine Project) is a wooden or fiberglass hulled Balanced Lug rigged sailing dinghy.-Wikipedia TSBB...
A 'Goose' is an extra long Puddle Duck Racer (PDR). Puddle Duck Racer - Easiest Sailboat to Build and Race https://www.pdracer.com/ Oz Goose...
My guess is that most likely one would need to steam solid wood.
I do like scuppered/slotted gunwales too. I have yet to do one myself, it might happen on the current project...
The nice thing about a laminated solution versus bending on a new solid wood strip/wale is less tendency for the new pieces to 'spring' the hull...
I have built a Puddle Duck Racer, which is the same as a Goose but without the 4 extra feet in the middle. My biggest issue/regret was not...
I would suggest known additives for making fillets (glass spheres and fumed silica, wood flour if you have it) and light weight +45/-45 stitched...
My mast is no more but estimating 2.5" diameter x 16 feet x pine (radiata) = 16.28lbs or 7.38kg I had to take the square root of the circular area...
I don't see anything so wrong with that fitting but I would make it a little tighter so the mast does not knock around. I have seen a similar one...
How are you doing the work? -lofted sections/stations -projecting curves from multiple views -solids and Boolean operations -import from hull...
Looks like some of the trailing edge broke off (assuming wood at this point) and it was brutally repaired. Is it possible to get a picture of it...
Pictures from farther away would be more telling at this point. It looks like perhaps a trailing edge extension was added.
Hull from free version of Delftship(online database, recreational, BrierCrek stretched to close to SOR dims) 60HP Motor and people off Grabcad...
I saw some being built last summer at the WoodenBoat School. They built the boats as one piece and then applied two bulkheads with a cardboard...
Looking forward to seeing your progress. I have been thinking about a 2.2m 2-piecer as a tender for a 6.4m sailboat.
Forum memeber @Dolfiman just posted a spreadsheet (Excel, OpenOffice) calculator for a chined boat. Gene-Hull Dinghy Chines 3.1...
It took me a minute to understand your scheme, it looks good. There is a layout tool that one can make for the corners. [ATTACH][ATTACH]
I had a PD Racer with s sprit sail and the sprit was close to 45mm. I cannot remember the mast was but it was bigger. Sunfish sailboat mast 57mm...
[ATTACH] https://sailboatdata.com/sailboat/dolphin-15-senior/ I would go NACA0009 on the dagger board and forget any sort of trim tab, and...
I believe this is the Régate d’Armoire-bateau école (Abe) based on the 'boat cabinet' design of visual artist Olivier Tourenc...
